CNC : Différence entre versions
De Nybi.cc
(→ZenToolWorks 12x12 (Section temporaire)) |
|||
Ligne 29 : | Ligne 29 : | ||
*v3 / 1000$ (1600 avec elec, moteur, etc.) / 483x483x95mm : http://www.lumenlab.com/d/m3-kit | *v3 / 1000$ (1600 avec elec, moteur, etc.) / 483x483x95mm : http://www.lumenlab.com/d/m3-kit | ||
− | *D'autres kits de cnc : http://www.zentoolworks.com/index.php?cPath=14 | + | *D'autres kits de cnc : http://www.zentoolworks.com/index.php?cPath=14 (Manu a aidé au montage de deux kits de 12x12 durant un bootcamp en Afrique : "pratique mais une machine open-source serait mieux, surtout pour les softs qui vont avec") |
− | |||
− | - | ||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
− | |||
===Grand format=== | ===Grand format=== | ||
*http://www.thingiverse.com/thing:5431 surface de travail 1100mm x 600mm x 100mm | *http://www.thingiverse.com/thing:5431 surface de travail 1100mm x 600mm x 100mm | ||
− | |||
− | |||
*http://www.sindrianarts.com/ (table d'usinage grand format, encore une CNC open source sympa) | *http://www.sindrianarts.com/ (table d'usinage grand format, encore une CNC open source sympa) | ||
− | |||
− | |||
*Joes 2006 : http://www.robovergne.com/fr/cnc/joes-2006-presentation/ | *Joes 2006 : http://www.robovergne.com/fr/cnc/joes-2006-presentation/ | ||
Version du 9 décembre 2011 à 20:57
DIY
Petit Format
- Un projet de petite CnC de précision du MIT : http://mtm.cba.mit.edu/machines/mtm_snap-lock/
- http://www.thingiverse.com/thing:9182 surface de travail : 180x180mm
Concept similaire au FabBot de Studio.Lo/MagLab, en gros la cnc se place sur ce qu'on veut usiner, et donc peut usiner une énorme planche qui autrement ne rentrerait pas dans la machine.
Ils fournissent un kit pour 680€ : http://www.repairablemachines.com/store.html
- Cartesio
http://reprap.org/wiki/Cartesio
Moyen Format
- DIYLILCNC 700$ / 254x254x51 mm (la CnC que certains d'entre nous on aidé à construire lors du Bootcamp FabLab à Nantes)
- Micro v3 / 700$ (1300 avec elec, moteur, etc.) / 323x298x85mm : http://www.lumenlab.com/d/micro-kit
- v3 / 1000$ (1600 avec elec, moteur, etc.) / 483x483x95mm : http://www.lumenlab.com/d/m3-kit
- D'autres kits de cnc : http://www.zentoolworks.com/index.php?cPath=14 (Manu a aidé au montage de deux kits de 12x12 durant un bootcamp en Afrique : "pratique mais une machine open-source serait mieux, surtout pour les softs qui vont avec")
Grand format
- http://www.thingiverse.com/thing:5431 surface de travail 1100mm x 600mm x 100mm
- http://www.sindrianarts.com/ (table d'usinage grand format, encore une CNC open source sympa)
- Joes 2006 : http://www.robovergne.com/fr/cnc/joes-2006-presentation/
Pro
- Makko M-640 KU 3A-C (3372€ HT avec broche, contrôleur, logiciel)
740x480mm, pas très loin de celle de Artilect (même fabricant mais moins grande)
Autres
- Une liste by Ponoko : http://blog.ponoko.com/2011/07/15/pricing-guide-to-diy-cnc-mill-and-router-kits/
- Une petite (milling machine) en Lego : http://hackaday.com/2011/08/20/lego-mill-produces-sculpted-models-with-fantastic-resolution/
Plein, plein, plein de liens: